FAQ
Quick answers to everyday questions.
Already using your Trackers but unsure about a few things? Start here, then open the linked guides for detailed steps.
SlimeVR asks for Wi-Fi setup. What should I do?
Skip it. Dawn Tracker uses a dedicated receiver, so no Tracker network setup is needed.
Connect the receiver, turn on the Trackers and check SlimeVR's device list.
Do I need to pair them every time?
No. Your set is already paired at the factory.
Use the Pairing guide for added Trackers, replacement receivers or confirmed lost pairing data. For dropouts or stuttering, start with Connection troubleshooting.
Which listed device is the Tracker in my hand?
Tap／double-tap or gently move just that Tracker and look for the highlighted device. Assign its body part and label it for next time.
Do I need to set body proportions every session?
No. The same user's body proportions can be saved.
After rewearing, do a Full Reset and Mounting Reset. After a short break without moving Trackers, check direction and perform a Full Reset if needed.
What's the difference between resets?
- Full Reset: Stand upright and look forward to realign direction.
- Mounting Reset: Take a shallow skiing squat to align mounting angles.
- Foot Mounting Reset: Additionally align feet if you have foot Trackers.
Follow SlimeVR's pose illustrations and prompts. Written instructions are in the Calibration guide.
Do I need manual sensor calibration?
Not during normal use. Trackers collect calibration data after being still for more than 30 seconds. Magnetometer-equipped models also collect data during use.
Complete assignments, wearing and resets first.
Which models have a magnetometer?
Mini 2 and Mini 2 Pro do; Mini 2T and Lite 2 do not.
It is off by default. We recommend enabling it for everyday use, except initially around lots of metal, such as a spring mattress. Restart SlimeVR after either change and check status in Tracker details. See Using the magnetometer for controls and battery-life differences.
How can I quickly correct shifted direction?
Enable Settings → Gesture control → yaw reset in SlimeVR. Then double-tap the chest Tracker to reset horizontal direction.
For Full Reset, stand naturally and face forward first. After rewearing or slipping, add a Mounting Reset. See Everyday resets.
My motion jitters. Should I maximize smoothing?
First check for moving straps or clothing and unstable connections. Then increase smoothing gradually.
More smoothing usually looks steadier but can add delay. Adjust a little at a time.
Sliding feet or a tilted waist when sitting—where do I start?
Check mounting, Mounting Reset, body proportions and headset floor height. If only one avatar looks wrong, check VRChat calibration and avatar proportions.
See Tracking troubleshooting for symptom-specific checks.
How do I turn Lite 2 on and off?
With Type-C facing down, press the left-hand button once to turn on; hold it around 1.5 seconds to turn off. Mini turns on automatically when removed from the dock. See Power and charging.
Does an unlit green light mean fully charged?
Green means charging. Off can mean full or not charging. Check power and contacts before deciding.
Do updates require downloading a tool?
No. Normal Mini／Lite Tracker updates are wireless through the Dawn OTA Update Center. See Firmware updates and flashing.
How many Trackers can each receiver handle? Can I mix models?
Mini supports up to 16, Lite up to 10. Mini and Lite Trackers／receivers are not interchangeable.
Buy extra Trackers through Taobao or our website and pair them after arrival. Mixing other series or brands depends on the combination; ask support if unsure.
Can I connect directly to a headset?
Yes. Dawn supports Windows, macOS, Linux and Android／Quest. Connect the receiver directly to a headset and follow the same install, connect, assign, wear and reset flow.
A wired tool can't detect my Tracker
Check that the USB cable supports data. Mini also needs the dock's data slot; Lite 2 v2.1 uses the WCH flashing tool.
Close other tools accessing the same device. See Firmware update failures.
Where do I get tools, setup advice or after-sales help?
Get Dawn Tracker Tools and the WCH flashing tool through our Discord or QQ support group, or contact us. Include your model and what you need help with.
See Warranty and after-sales support for warranty information.